絲管式冷凝器與傳統翅片冷凝器相比的優越性：

The advantages of Wire-on-tube condenser compared with fin condenser:
1.解決了異種金屬相互接觸腐蝕性問題 1. wire on tube condenser can solve the problem of corrosion of dissimilar metals.
2.絲管式冷凝器管道從頭到尾一體彎制成形，系統流動阻力更小，更利于系統回游2. Wire on tube condenser made from one curved pipe from stem to stern. The flow resistance from the system will be smaller.
3.易于清洗，同時外部風阻系數更小 3. Wire on tube condenser is easier to clean. The external drag coefficient is smaller.
4.成本低廉，只有不到翅片2/3的價格 4. The cost of wire on tube condenser is cheaper. It’s 2/3 less than fin condenser.
5.因銅價的不斷提升，現市場上銅管壁厚大約0.27mm，而鐵管則為0.71mm，耐壓性能更強。5. The price of copper is climbing up. So the thickness of copper pipe is about 0.27mm in market., while the thickness of steel pipe is 0.71mm. The pressure resistance is stronger.

我公司現有常規型號能配置<100w—736w>功率的壓縮機。
The power of compressor is available from100W to 736W. 

我司也能為客戶精心設計一款符合客戶要求的絲管式冷凝器，客戶只需給出以下數據供我們參考，便能完成設計：
We can produce according to drawing or sample supplied by clients, also can help clients design different condensers according to the below data:

1.系統制冷劑流量  1. The flux of refrigerant.
2.測試工況：a. 環境溫度 b. 相對濕度 2. Test condition: a.Ambient Temperature b. Relative Humidity
3.標準蒸發溫度 3. Standard evaporation temperature
4.箱內溫度  4.  Inside temperature
5.安裝空間位置  5. Installation location